Specialists in Aerospace Safety, Control and Automation Systems.
On average- WE Have Helped our clients reduce their manufacturing time by 50%

Testimonials and Recent Project Details


Below are just a few of the many testimonials that we received from happy clients. We will be updating this area regularly. If in the meantime you have any questions or would like to discuss a possible project, please contact us in the strictest confidence


1.

Neil Spokes

Team Leader Test Engineering New Product Introduction, Aero Engine Controls

Top qualities: Great Results, Expert, High Integrity

“Sammuel is a good resource for both hardware and software TE solutions, and is able to provide good documentation to support designs and verification. ” May 9, 2012


2.

Ken McMullan,
Senior Software Engineer, Goodrich Engine Control Systems

“Sammuel is hard working and very conscientious. He puts maximum effort into each task and, as an extremely knowledgeable engineer, can work the task through to completion, either as a team member or as an individual. He is extremely good at explaining complicated process in terms anyone can understand.” May 27, 2009


3.

Phil Rawlings,
UK Director & Technical Consultant, Cyth Systems Ltd.

“I worked with Sammuel at Goodrich, and found him to be very knowledgable about his test rigs and UUT hardware - even though both these pieces of equipment were inherently complex. Sammuel and I worked together on many occasions developing test software, and his help proved invaluable.” April 13, 2007


4.

Jon Ward,
Test Systems Software Engineer, Goodrich Engine Control Systems


“Sammuel is a go-getter. He gets the entire system in his mind, and then figures out how to test it. You want to drive a unit until it breaks? Sammuel's your man, and he will tell you how it broke as well.” November 8, 2007


Recent Projects Include

►Successful automation of manual test for A380 Slat achieving 80% reduction in test time leading to an increase in manufacturing capacity.

►Successful completion of safety of flight testing for the 787 Dreamliner - Landing activation Hydraulic Control System using LabVIEW and PLC programming.

►Efficient re-design of software control system for Airbus A380 landing gear emergency release system leading to successful flight re-qualification.


We hope that you have found these genuine testimonials helpful, if you would like to ask us any questions or would like to discuss in details your own project please contact us in the strictest confidence and why not find out more about me

Return to Test and Measurement Homepage from Testimonials